Прошивка Infinix Note 30 Pro NFC (X678B) прошивка

[Jerry]

Прошивка Infinix Note 30 Pro NFC (X678B)​

EU ROM X678B-H894Q-T-EU-230426V1043 Factory Signed Firmware platform: MT6789 project: x678b_h894

Щоб побачити цей прихований вміст, ви повинні відреагувати однією з таких реакцій: Лайк, Ніндзя

 

[Jerry]

EU ROM X678B-H894Q-T-EU-231009V2642 Factory Signed Firmware

Завантажити з сервера

Щоб побачити цей прихований вміст, кількість ваших дописів має становити 7 або Придбати доступ

 

[Пашко23]

Протестив прошивку через Infinity. Все окей) шив без preloader/та підкинув auth sv5

Operation: Write Flash [ v2.52 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Wait...
[+] Re-Partition
[-] Checksum Verify
[+] Pre-Erase
[+] Check compatibility
[+] Backup
[-] FLASH ERASE

D:\Infinix\X678B\
  vbmeta.img [ 8.00 Kb ] 5cd983a7
  vbmeta_system.img [ 4.00 Kb ] a2189f46
  vbmeta_vendor.img [ 4.00 Kb ] 0f230eae
  md1img.img [ 51.03 Mb ]
  spmfw.img [ 14.34 Kb ] e776b8ad
  pi_img.img [ 15.97 Kb ] 7ec17ef4
  dpm.img [ 144.70 Kb ] 0eefda6e
  scp.img [ 425.67 Kb ] fd478623
  sspm.img [ 703.88 Kb ] abbfa19f
  mcupm.img [ 124.91 Kb ] b783576f
  gz.img [ 2.57 Mb ] 6890c414
  lk.img [ 2.13 Mb ] 0b748df6
  logo.bin [ 1.27 Mb ] be25bc72
  boot.img [ 64.00 Mb ]
  vendor_boot.img [ 64.00 Mb ]
  dtbo.img [ 8.00 Mb ] 7866e509
  tee.img [ 750.67 Kb ] beb3e332
  efuse.img [ 512 B ] e4b6e24e
  logo.bin [ 1.27 Mb ] be25bc72
  super.img [ 5.57 Gb ]
  tranfs.img [ 100.14 Kb ] 9516b116
  userdata.img [ 14.70 Mb ]
Files: 22; Total size: 0x171FA8F9C [ 5.78 Gb ]

  Product Brand: Infinix
  Product Device: Infinix-X678B
  Product Model: Infinix X678B
  Product Name: X678B-EU
  SW: Infinix/X678B-EU/Infinix-X678B:12/SP1A.210812.016/230425V847:user/release-keys
  Patch Level: SP1A.210812.016
  Display ID: X678B-H894OPQ-T-OP-230425V847
  SW Version: 230425V847
  Ver. CodeName: REL
  Ver. Release: 12
  Sec. Patch: 2023-04-05
  Build Time: 25.04.2023 16:58:02
  Product Info: x678b_h894
  SW: vext_x678b_h894-user 12 SP1A.210812.016 311347 release-keys
  Product Manfct: INFINIX
  Product Board: Infinix-X678B
  Board Platform: mt6789
Firmware ID: MT6789_INFINIX_Infinix_X678B_OSv12_X678B-H894OPQ-T-OP-230425V847_SP1A.210812.016_x678b_h894
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port_V1632 (COM27)
MODE [0]: BOOTROM; PORT: 27
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6789 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x1208
  CODE: G99
  TYPE: NEXTGEN [LUCI]
  MEID: ACD696B8A881D29F5272B6FDFBB1F88D
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
  VER: 0x05 BL: 0xFE [BOOTROM]
  SOCID: 068E298B96441BCCF183A382A3DDCAC91343818F58E1C4D1FF093131D7328DC7
SLA: Sending Auth
  Auth accepted
  Challenge not used
AGENT: MANUAL: Infinix: Infinix-G99-General
  [0bdd0341] C:\InfinityBox\CM2MT2\boot\Infinix\Infinix-G99-General\DA_BR.bin
  [f835e4ca] C:\InfinityBox\CM2MT2\boot\Infinix\Infinix-G99-General\auth_sv5.auth
  [4dfca95a] D:\Infinix\X678B\preloader_x678b_h894.bin
Looking for suitable BootChain in DA...
Found: MT6789; DA: MTK_DOWNLOAD_AGENT
ID6 vendor: 0
ID6 Memory:
    H9HQ15AFAMBDAR  [ 8.00 Gb ]
    KM2P9001CM-B518  [ 6.00 Gb ]
    KM8F9001JM-B813  [ 8.00 Gb ]
    H9QT1G6DN6X132  [ 8.00 Gb ]
    H9QT0G6CN6X146  [ 8.00 Gb ]
BROM: Sending 1st DA...
  DA sent
Jump to DA... Ok
DA: Agent Started

LC: Agent online
  Agent ENV tuned succesfully

Version: 1.2
DevRND: FF084737D59D71F775C89E9728D26CD5
Battery: 4358 mV
RAM Size: 0x0000000000  [ 0 B ]
Storage: UFS ID: eUFS2.2_256
  BLK: 0x00001000
  LUN0: 0x0000400000  [ 4.00 Mb ]
  LUN1: 0x0000400000  [ 4.00 Mb ]
  LUN2: 0x3BAD800000  [ 238.71 Gb ]
  LUN3: 0x0000000000  [ 0 B ]

LC: Hardware not initialized yet. Process HWinit...
LC: Hardware init Ok
LC: Set HostCapps... Ok
LC: Set HostInfo... Ok

Version: 1.2
DevRND: FF084737D59D71F775C89E9728D26CD5
Battery: 4362 mV
RAM Size: 0x0200000000  [ 8.00 Gb ]
Storage: UFS ID: eUFS2.2_256
  BLK: 0x00001000
  LUN0: 0x0000400000  [ 4.00 Mb ]
  LUN1: 0x0000400000  [ 4.00 Mb ]
  LUN2: 0x3BAD800000  [ 238.71 Gb ]
  LUN3: 0x0000000000  [ 0 B ]

LC: Boot to 2nd Agent.. Ok
LC2: Process HW init... Ok

LC2: SLA request by agent, vendor: 0
  SLA ID: 068E298B96441BCCF183A382A3DDCAC91343818F58E1C4D1FF093131D7328DC7
Request...
Finished
Received: 0x200
LC2: SLA: Challenge Pass

CHIP: MT6789 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x1208
  CODE: G99
  TYPE: NEXTGEN [LUCI]
  MEID: 068E298B96441BCCF183A382A3DDCAC9

USB: HIGH-SPEED
Boot done NEXTGEN [LUCI]
[FL]: COMBO scatter! Update settings to UFS
[FL]: Set: vbmeta.img
[FL]: Set: vbmeta_system.img
[FL]: Set: vbmeta_vendor.img
[FL]: Set: md1img.img
[FL]: Set: spmfw.img
[FL]: Set: pi_img.img
[FL]: Set: dpm.img
[FL]: Set: scp.img
[FL]: Set: sspm.img
[FL]: Set: mcupm.img
[FL]: Set: gz.img
[FL]: Set: lk.img
[FL]: Set: logo.bin
[FL]: Set: boot.img
[FL]: Set: vendor_boot.img
[FL]: Set: dtbo.img
[FL]: Set: tee.img
[FL]: Set: efuse.img
[FL]: Set: logo.bin
[FL]: Set: super.img
[FL]: Set: tranfs.img
[FL]: Set: userdata.img

HW verification... Ok

Analyze PMT...
PMT: PGPT [0x64] Records: 66
Verify config values...
Ok
Loaders Ok
Pre-Flash backup...
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6789__068E298B96441BCCF183A382A3DDCAC9

Verify PMT...
Scat|PMT: number of partitions mismatch
Warning: DEVICE <-> FIRMWARE PartTable mismatch!
Continue may destroy device security!
Continue? Yes Ok
Verify SEC DL...
Pre-Erase...
Erase: 0x0000000000000000 0x0000000000108000
Erase: 0x0000000000408000 0x0000000008200000
Erase: 0x000000000A608000 0x0000000004000000
Erase: 0x000000000E708000 0x0000000005100000
Erase: 0x0000000018000000 0x000000001CA00000
Erase: 0x0000000035200000 0x0000000000F80000
Erase: 0x000000003A180000 0x0000000325680000

RePartition... Ok
Analyze PMT...
PMT: PGPT [0x64] Records: 66

Flash write...
Write: VBMETA_A [ 8.00 Kb ] Ok
Write: VBMETA_SYSTEM_A [ 4.00 Kb ] Ok
Write: VBMETA_VENDOR_A [ 4.00 Kb ] Ok
Write: MD1IMG_A [ 51.03 Mb ] Ok
Write: SPMFW_A [ 14.34 Kb ] Ok
Write: PI_IMG_A [ 15.97 Kb ] Ok
Write: DPM_A [ 144.70 Kb ] Ok
Write: SCP_A [ 425.67 Kb ] Ok
Write: SSPM_A [ 703.88 Kb ] Ok
Write: MCUPM_A [ 124.91 Kb ] Ok
Write: GZ_A [ 2.57 Mb ] Ok
Write: LK_A [ 2.13 Mb ] Ok
Write: LOGO_A [ 1.27 Mb ] Ok
Write: BOOT_A [ 64.00 Mb ] Ok
Write: VENDOR_BOOT_A [ 64.00 Mb ] Ok
Write: DTBO_A [ 8.00 Mb ] Ok
Write: TEE_A [ 750.67 Kb ] Ok
Write: EFUSE [ 512 B ] Ok
Write: LOGO_B [ 1.27 Mb ] Ok
Write: SUPER [ 5.57 Gb ] Ok
Write: TRANFS [ 100.14 Kb ] Ok
Write: USERDATA [ 14.70 Mb ] Ok

RePartition... Ok

Trying to reboot...
Done: 00:09:59
Reconnect Power/Cable now

 

[Пашко23]

Результат прошивки

 

[Jerry]

OP ROM
X678B-H894OPQ-T-OP-240108V3414 Factory Signed Firmware

Завантажити з сервера

Щоб побачити цей прихований вміст, ви повинні відреагувати однією з таких реакцій: Лайк

RU ROM
X678B-H894Q-T-RU-240105V3395 Factory Signed Firmware

Завантажити з сервера

Щоб побачити цей прихований вміст, кількість ваших дописів має становити 40 або Придбати доступ